80 Little Falls Road     Fairfield, New Jersey 07004 Tel: (973) 575-5120     Fax: (973) 575-5160 Web: www.acudor.com    E-mail: info@acudor.com  Floor Hatches - Channel Frame

FC-300/ H2O Description
The Acudor FC-300 / H20 aluminum floor access doors are designed for interior and exterior applications where water tightness is required. The channel frame construction with 1-1/2" drainage coupling and integral anchor flange is designed to cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

Floor Hatch Specifications

Material:		Aluminum door and frame: stainless steel hinges and hardware.
Door:		FC-300: 1/4" aluminum diamond plate reinforced for live load of 300 pounds/sq.ft. FC-H2O: 1/4" aluminum diamond plate reinforced to meet AASHTO specifications H2O-44 for traffic loading (16,000 lb. wheel load with 30% added for impact.)
Frame:		Channel frame fabricated from aluminum extrusion with 1-1/2" drainage coupling and integral 1" anchor flange.
Hinge:		Stainless Steel butt hinges with tamperproof stainless steel bolts and nuts.
Opening Device:		Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. When required, stainless steel compression springs can be provided to add lift assistance.
:Latch:		Flush aluminum drop handle with staple for padlock.
Finish:		Mill finish, with optional bituminous coating on exterior of frame.

 

STANDARD SIZE FLOOR HATCHES (special sizes available upon request)