 |
|
|
|
SVG Series Description |
|
|
Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent reaches a certain temperature. Optional Features:Acrylic domes Louvered Curbs Stainless Steel Hardware Curb Mounted Modified Curb for Metal Building |
 |
Smoke Vent Specifications |
| Cover: | 14 gage galvanized steel / .125 aluminum in box type design with 1" rigid fiberglass insulation and 22 gage galvanized steel / .040 aluminum cover liner. Continuous santoprene weather / draft seal is attached to inside of cover to provide a flush, tight fit. | |
| Curb: | 14 gage galvanized steel / .125 aluminum with 1" rigid fiberglass insulation at curb exterior. Curb is 12" high, and has 3-1/2" wide mounting flange with pre-drilled holes. | |
| Hinge: | Steel butt hinges with brass pin. | |
| Opening: Device |
Fully enclosed compression spring operators allow cover to open against 10-lbs./sq. ft. wind or snow load when released. | |
| Latch: | Manual inside / outside release that works with a fusible link or a resettable electric link. | |
| Finish: | Galvanized
steel: prime painted with rust-inhibiting grey primer. Aluminum: mill finish. |
|