FC-H20 Introduction
The Acudor FC-H20 is an aluminum floor door for H20 loading. The FC-H20 is designed for Indoor or Outdoor applications where dirt and water are prevented from falling into work area. Drainage is provided through threaded coupling in channel.
-
Material:
Aluminum door and frame; stainless steel hinges and hardware -
Door:
1/4" aluminum diamond plate reinforced to meet AASHTO specification H 20-44 for traffic loading (16000 lb. wheel load with 30% added for impact) -
Frame:
Channel frame fabricated from aluminum extrusion with 1 1/2" drainage coupling and integral 1" anchor flange -
Hinge:
Stainless steel butt hinges with tamperproof stainless steel bolts and nuts -
Opening Device:
Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. When required, stainless steel compression springs can be provided to add lift assistance. Available with electrical actuators, operated by wall mounted push button switch, and remote control -
Standard Latch:
Flush aluminum drop handle with stainless steel slamlock -
Finish:
Mill finish, with optional bituminous coating on exterior of frame
Floor Doors
Product Downloads
| Product Information | Submittal Drawing | BIM | |
|---|---|---|---|
|
FC-H20
|
|
|
|
Product Highlights
Designed for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads
Channel frame construction with 1½" drainage coupling and integral anchor flange is designed to be cast into concrete
Diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm
Designed for interior and exterior applications where watertightness IS NOT required
Request Information
Do you have a question regarding our products? Do you need more information for your project?
Please don’t hesitate to reach out, we’re here to help!
