FT-8040 Introduction
The Acudor FT-8040 is a recessed floor door. The FT-8040 is recessed 1/8" for Vinyl Tile and carpet.
-
Material:
Aluminum door and frame -
Door:
1/4" smooth aluminum plate reinforced for live load of 150 lb/sq. ft. Extruded edging is welded to door panel, providing a 1/8" recess -
Frame:
Angle frame fabricated from aluminum extrusion with integral 1" anchor flange on three sides and welded anchor straps on the hinge side -
Hinge:
Extruded aluminum hinges are welded to inside of door panel and pivot on stainless steel pins. Hold open arm with red Vinyl grip allow automatic opening -
Opening Device:
Door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. Stainless steel torsion bars provide lift assistance. Available with electrical actuators, operated by wall mounted push button switch, and remote control -
Standard Latch:
Stainless steel slamlock with a fixed inside handle, removable outside handle, and removable threaded plug -
Finish:
Mill finish with bituminous coating applied to exterior of frame
Floor Doors
Product Downloads
| Product Information | Submittal Drawing | BIM | |
|---|---|---|---|
|
FT-8040
|
|
|
|
Product Highlights
Recessed 1/8" to accommodate carpeting and vinyl tile.
Door panel is equipped with a flush aluminum drop handle and an automatic hold open arm
1/4" smooth aluminum plate reinforced for live load of 150 pounds/sq. ft.
Angle frame fabricated from aluminum extrusion with integral 1" anchor flange on three sides and welded anchor straps on the hinge side
Request Information
Do you have a question regarding our products? Do you need more information for your project?
Please don’t hesitate to reach out, we’re here to help!
